ProNano Diamond Nano Wax is a highly effective and non-contact wax for all vehicles. The revolutionary triple formula ensures that the cleaned vehicle dries, it gives the treated surface optimal paint protection and a deep shine and it makes the vehicle water and dirt repellent. The wax can be applied to wet surfaces, making it an optimal wax for use immediately after cleaning the vehicle.

The ProNano Diamond Nano Wax has been developed on the basis of Nano Technology, which ensures deep protection of the paint and a gloss and color-enhancing result. 

Features of the ProNano Diamond Nano Wax

• Can be applied without contact
• Hydrophobic effect
• Color and gloss enhancing effect
• Water and dirt repellent effect

Mixing ratio

Snow Foam method: (foam gun/foam lance)
Mix 100ml ProNano Diamond Nano Wax with 900ml water (in a 1 liter foam gun). Processing time: 30 - 60 seconds.
Low pressure method: (low pressure pump/does not create foam)
Mix 15ml of ProNano Diamond Nano Wax with 985ml of water (in a 1 liter pump). Processing time: 30 seconds.

Usage

Shake well before use. Spray the vehicle from bottom to top. Wait for the specified processing time. Rinse thoroughly with low pressure to remove excess wax residue.

Contactless cleaning
Non-contact cleaning is a two-step process, you clean your vehicle, then protect your vehicle with a wax. This method ensures an optimal result every time. The wax provides a hydrophobic protective layer on your paintwork that repels water and dirt. By following these two steps you will keep your vehicle in optimal condition and you will find that cleaning becomes easier and more effective. For example, use the ProNano Plus to clean your vehicle. This shampoo is suitable for all vehicles and effortlessly removes organic and stubborn pollution.

Do you want to switch from traditional cleaning to contactless cleaning or have you not thoroughly cleaned your vehicle for more than 3 months ? In either case, there may be a layer of static buildup on your vehicle. You can recognize static pollution by the film layer on the paint that remains on your fingers when you touch the vehicle after cleaning. To remove this type of pollution, it is necessary to use a sponge, microfiber glove or brush. In this case it is recommended to use the traditional hand washing method.

Nanotechnology
ProNano products are developed on the basis of Nano Technology, which results in a high level of surface protection. Thanks to nano-molecules, small particles that can penetrate deep into the surface, the protection process goes further than with an average wax. This leads to a deep protection of the surface. In addition, the gloss and high gloss of the surface are strengthened and restored, and you will experience a more intense color experience.